Basic Info.
Principle
Magnetic Sensors
Measurement Accuracy
±5mm
Material
CS,316,316L,316ti,321,1.4301,1.4435
Process Temperature
-196~100ºC
Measuring Range
300~15000mm
Installation
Side Mounted , Top Mounted ,Button Mounted
Alarm
Top and Low Alarm of Magnetic Level Indicator
Transport Package
Polywooden Case
Specification
depend on the products length
Product Description
Application scope
UHZ-517C14 is applied to measure the level of vaporizable liquid especially liquefied gas . Blocking lever is used to divide guide tube into gasification chamber and measure chamber . When liquefied gas is infected by temperature and vaporize into being gas bubbles , the bubbles will rush up along gasification chamber and not enter into measure chamber to affect magnetic float . Which effectually prevents magnetic float jumping . So the gauge can operate reliably even at liquid medium vaporizing a lot . The operate pressure rating is ≤300LB(4MPa) ,the operate temperature is between -20~100ºC.
Our advantage
- Good sealing, leakage proof and reliable measurement in high temperature, high pressure, high viscosity and strong corrosion applications.
- No blind area. Striking in display, clear in reading and wide in range.
- With alarm and control switch, the liquid level or interface can be controlled at upper or lower limit. LB transmitter converts the signal of liquid or interface level into 4~20mA DC standard signal, and achieves the purpose of remote measurement, indication, record and control.
Structure Principle
The magnetic liquid level gauge operates on principle of Buoyancy and Magnetic Coupling. As the liquid level rise or fall in the vessel, the float in chamber will rise or fall correspondingly . The permanent magnet in the float actuates the yellow and black rollers to reverse 180°due to magnetic coupling. As liquid level increases, rollers reverse from black to yellow ; while liquid level decreases, rollers reverse from yellow to black. The yellow/black interface of indicator shows the actual level of medium in vessel. The rollers material of common level gauge for atmospheric temperature is plastic resin; and for high temperature applications(up to520ºC), alumina ceramic rollers with permanent magnet steel armored should be used.
Options
LB transmitter imposes the level signals from magnetic system coupling on every dry reed of resistance chain in sensor. It will change output resistance continuously. The measure voltage will change accordingly proportional to the levels in vessel. With transmission transducer, output a two wire 4~20mA analog signal; HART communication protocol is optional.
Tri-magnet (Quadra-magnet) driven level switch
BK-1/EX Tri-Magnet Level Switch, as the most reliable and practical level switch in the world, has bistable memory function. Mounted on the indicator, in the same magnetic coupling system with level gauge, not contact with the process medium, this level switch is high-temperature resistant, explosion proof and shockproof. It utilizes three magnetic coupling burst switches. When the magnetic float (the first magnet steel) in the chamber close to the switch, the second magnetic component will rotate, meanwhile the third magnet steel in the switch will rotate reversely and the push bar will actuate the switch. BK-1H/Ex Quadra-magnet driven level switch is suitable for high temperature applications. The fourth magnetic coupling is used to keep the terminal box far from the high temperature heat source, and working temperature of BK-1H/Ex Quadra-magnet level switch can be up to 420ºC.
Options
LB transmitter imposes the level signals from magnetic system coupling on every dry reed of resistance chain in sensor. It will change output resistance continuously. The measure voltage will change accordingly proportional to the levels in vessel. With transmission transducer, output a two wire 4~20mA analog signal; HART communication protocol is optional.
Tri-magnet (Quadra-magnet) driven level switch
BK-1/EX Tri-Magnet Level Switch, as the most reliable and practical level switch in the world, has bistable memory function. Mounted on the indicator, in the same magnetic coupling system with level gauge, not contact with the process medium, this level switch is high-temperature resistant, explosion proof and shockproof. It utilizes three magnetic coupling burst switches. When the magnetic float (the first magnet steel) in the chamber close to the switch, the second magnetic component will rotate, meanwhile the third magnet steel in the switch will rotate reversely and the push bar will actuate the switch. BK-1H/Ex Quadra-magnet driven level switch is suitable for high temperature applications. The fourth magnetic coupling is used to keep the terminal box far from the high temperature heat source, and working temperature of BK-1H/Ex Quadra-magnet level switch can be up to 420ºC.
Technical Data
| Measure range: | 300~15000mm |
| Accuracy: | ±10mm |
| Medium density: | ≥350kg/m3 |
| Density difference: | ≥150kg/m3 |
| Follow Speed: | ≤0.08m/S |
| Ambient vibration: | ≤25Hz |
| Amplitude: | ≤0.5mm |
| Medium viscosity: | ≤0.4PaS, For the high viscosity and easy crystallization at low temperature, heating jacket level gauge can be used. |
| Material: | 304, 316, 316L, 316Ti, 321, 1.4301, 1.4435, 1.4401, 1.4571, 1.4783, 0Cr18Ni9, 1Cr18Ni9Ti, 00Cr17Ni14Mo2, 0Cr17Ni12Mo2, 0Cr18Ni2Mo2Ti, PP, PVC,PTFE, Ti, Zr, Ta, Hastelloy C-276, Monel |
| Process flange: | Factory standard: HG20592~20635-97 DN25 PN1.0~PN32 Or according to ANSI B16.5;1/2"~10" DN10-DN250 GB/T 9112-2000;JB/T 79.1-94SH3406-1996 DIN2635; DN10-DN250; DIN 2527; DN10-DN25010A~250A JIS 20K FF RF; 1/2"~10" JPI |
| Pressure rating: | PN1.0, PN1.6, PN2.5, PN4.0, PN6.4, PN11.0, PN16.0, PN25, PN32.0; Class 150LB, 300LB, 600LB, 900LB, 1500LB, 2500LB, ANSI |
| Working temperature: | -196~520ºC, 77.15~793.15K |
| Enclosure: | IP66 |
| Safety mark: | Exia IICT1~T6; Exd IIBT1~T6 |
Compare with other supplier products ,Shanghai Xingshen pros:
- Main pipe Diameter≥63mm,The wall thickness≥2mm
- Compared with aluminum alloy material , stainless steel panel and ruler greatly improve the weather resistance ,appearance and life of the product
- The magnetic flip plate once molding is sealed in the transparent tube , completely eliminate the craking , fading and aging of the traditional circular column .
CertificationsCompany Information Our ServicesDocuments of product from manufacture should be Chinese/English Contrast .
Manufacture should provide a good guaranty for after-sales service , use and technical consult of maintenance , and ensure that solution is offered within 24 hours after receiving notice of buyer .
The manufacture should provide necessary conditions for the buyer coming to the factory for inspection and acceptance
Shanghai Xingshen should carry out inspection on the instruments , equipments and relevant .
Each instrument and automatic control device has permanent plates mode of corrosion resistance stainless steel . Language on the plate should be English .
Packaging & Shipping
FAQ. Q: How long will you give me the reply?
A: we will contact you in 1 hours as soon as we can.Professional sales engineers 7/24 online services.
2. Q:Could you provide me the shortest lead time?
A:We have materials in our stock,if you really need, you can tell us and we will try our best to satisfy you.And our company provides in-time delivery with safety transportation,meeting customers need.
3. Q: What is your terms of payment ?
A: We could accept Paypal, T/T,D/P,L/C,Credit Assurance and on you request.
4. Q:Could I visit your factory?
A: Sincerely invite you to visit our factory.
5. Q: Do you provide samples ?
A: Yes,we have materials in stock to help you to get the samples as soon as we can.
6. Q: How about the quality of the managements ?
A: We have a complete quality control system, all of our products will be fully pre-inspection by QC departments before shipping to you. We have the certification of ISO, CE, HSE. we could send the certification test of our company to you.
7. Q: What is the warranty for your product ?
A: Warranty: 1 years, Lifetime maintenance.Sales engineers and technical will be one-on-one service for you to exclude all obstacles when use our sensors.
Address:
No. 8, Xuanzhong Road, Pudong New Area, Shanghai, China
Business Type:
Trading Company
Business Range:
Industrial Equipment & Components, Instruments & Meters
Management System Certification:
ISO 9001, ISO 14001, OHSAS/ OHSMS 18001
Company Introduction:
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.
){kind=link}